How To Use Our Products

Follow our instructions below on how to use our products.

Click on any one of the products to jump to instructions.

Cold Brew System

How to use the Cold Brew System

1. Add 3.5 oz or 100g of coarse-ground coffee into the Dual-Filter. Do not fill past the "3.5oz 100g" mark. (For a non-concentrate, add less ground coffee.)

2. Slowly add cold or room-temperature water, up to the "MAX" line.

3. Put the lid on the Brewer and brew on countertop or in the fridge for up to 12 to 24 hours.

4. After brewing, swap the Dual-Filter with the spout.

5. Enjoy your delicious, residue-free cold brew!

6. Wash the filter and place it back in the Brewer. Repeat above steps!

Care Instructions

  • All parts are dishwasher-safe.
  • Do not squeeze the Dual-Filter as it can cause bends.

Smart Canister

How to use the Smart Canister

Before you start: Make sure to fully charge the lid using the USB-C charger included in the box.

1. Add your coffee beans to the Smart Canister. Do not fill past the "MAX" line.

2. Twist the Smart Lid clockwise to close. Push the button on the lid to activate the vacuum process. The vacuum process will stop automatically once the lid detects the optimal pressure level.

3. To open the Smart Canister, push the button again to release the vacuum seal. Twist counterclockwise to open the lid.

Light settings

  • Green

    When you push the button down OR automatic vacuum process initiated.

  • Flashing green

    Green light will flash twice when vacuum seal is released.

  • Blue

    Lid is charging - the light will turn off when charging is complete. You can use the lid while charging.

  • Flashing red

    Battery level has reached 20% OR user error message.

Care Instructions

  • Use a damp towel to wipe the surface of the lid. DO NOT wash under running water or put it in the dishwasher.
  • DO NOT store Smart Canister in the refrigerator or freezer.
  • The jar is dishwasher-safe.

Sifter

How to place/remove the Sifter filter plates

1. To change the Sifter filter plates, hold the Sifter ring upside down.

2. Turn the knob counterclockwise until you hear a click to release it. Set it aside.

3. Place the 800μm or the 500μm filter plate inside.

4. To lock in the plate, place the knob back in and turn it clockwise until you hear a click.

How to use the Sifter

1. Add desired amount of ground coffee into the glass jar. Do not overfill.

2. Place the filter plate on the jar with the appropriate plate size for your coffee.

  • 800μm

    For coarse ground. Suitable for cold brew and French press.

  • 500μm

    For medium ground. Suitable for pour-over, Aeropress, moka pot.

3. Screw the lid on, hold the Sifter upside down, and shake well for about 20 to 30 seconds to sift out the ultra-find grounds.

4. Use what's left in the glass jar to brew a smooth, balanced cup of coffee.